INDOOR POSITIONING SYSTEM AND GPS FOR INSTANT AUTOMATIC REGISTRATION IN THE FIELD
The terrestrial 3d laser scanner Z+F IMAGER® 5010X comes with a unique positioning system which works outdoors and, as an industry-first, also indoors! It will estimate the current position and orientation of the terrestrial 3d scanner to support the registration algorithm to automatically find the correct solution. The scanner will also track your movements while carrying the device on to the next setup and hence provides position estimation for the registration process.
With Z+F LaserControl® Scout and the terrestrial 3D laser scanner Z+F IMAGER® 5010X , Zoller + Fröhlich starts a laser scanning revolution with the Blue Workflow and automatic on-site registration!
DRASTICALLY IMPROVED WIFI SPEED AND RANGE
Working with the 802.11n-standard and dual antennas, the Z+F IMAGER® 5010X has an increased working range and allows you to communicate and stream scan data quickly to the Scout tablet.
Range up to 187 meters (approx. 600 ft.) of the 3D laser scanner
Due to the wavelength and the approved ranging system, the devices operate within a maximum range of 187 m (approx. 600 ft.).
HIGH-SPEED UP TO 1 MILLION PIXEL/SECOND
With a maximum measurement rate of 1,016,027 pixel/sec the terrestrial laser scanners of Zoller + Fröhlich are one of the fastest in the world.
320° X 360° FIELD-OF-VIEW
The large 320°x 360° field-of-view yields maximum coverage.
LASER CLASS 1
Most terrestrial 3D laser scanners of Zoller + Fröhlich are classified “eye-safe“, according to laser class 1 requirements.
HDR I-CAM
The integrated camera works very well in all environments. One focus is to always provide realistic panoramas. To make the workflow as user friendly as possible, the Z+F i-Cam is fully integrated into the Z+F IMAGER® 5010X.
STABLE
The new dynamic compensator ensures maximum reliability of your scans.
BLUE WORKFLOW
The term “Blue Workflow” describes a series of optimized work steps in surveying and processing data. The focus is on flexibility, data security and efficiency. With the Z+F LaserControl® Scout and the laser scanners Z+F IMAGER® 5010X and 5016, point clouds can already be registered, checked, edited and evaluated in the field. The freed capacities may be used for other tasks. In addition, the user recognizes problems at an early stage and can intervene directly in the field. Especially the real-time registration, by Z+F LaserControl® Scout helps to save valuable time and keep a good project overview.
All these steps are possible on site with the Blue Workflow:
- Automatic registration
- Check data quality
- Check target quality
- Find & fill gaps with more scans